Care & Maintenance
Proper care ensures your LUNVYR fixtures maintain their beauty and performance for decades. Follow our comprehensive guide for finish-specific maintenance.
Care by Finish Type
Natural Brass
Living finish that develops patina over time
- Dust weekly with microfiber cloth
- Clean with warm water and mild soap
- Dry immediately to prevent water spots
- Apply brass cleaner monthly for shine
- Wax quarterly with paste wax
- Embrace natural patina development
Aged Brass
Pre-patinated finish with rich depth
- Dust regularly with soft brush
- Clean gently with damp cloth only
- Avoid brass cleaners and polishes
- Pat dry, never rub aggressively
- Protect patina with light wax coat
- Touch up with patina solution if needed
Blackened Steel
Dark oxide finish requiring gentle care
- Dust with soft, dry cloth
- Use minimal moisture when cleaning
- Apply light coat of paste wax
- Avoid abrasive cleaners
- Check for rust in humid areas
- Re-blacken if finish wears
Polished Steel
High-gloss finish requiring regular maintenance
- Clean weekly with stainless cleaner
- Buff with microfiber for shine
- Remove fingerprints immediately
- Polish monthly with metal polish
- Protect with clear coat if desired
- Address scratches promptly
General Maintenance
Cleaning Procedures
Proper cleaning preserves finish integrity and extends fixture life.
Weekly Dusting
Use microfiber cloth to remove dust and debris before it accumulates.
Deep Cleaning
Monthly thorough cleaning with appropriate finish-specific products.
Spot Treatment
Address stains and marks immediately to prevent permanent damage.
Protection
Apply protective coatings as recommended for specific finishes.
Electrical Maintenance
Regular electrical checks ensure safety and optimal performance.
Connection Check
Annual inspection of wire connections by licensed electrician.
LED Testing
Test LED functionality and color consistency every 6 months.
Dimmer Compatibility
Verify dimmer settings and compatibility annually.
Safety Inspection
Professional electrical safety check every 2-3 years.
Hardware Maintenance
Keep mechanical components secure and functioning properly.
Screw Tightening
Check and tighten mounting screws every 6 months.
Pivot Points
Lubricate adjustable joints with light machine oil annually.
Ceiling Attachment
Verify ceiling box security and weight capacity annually.
Wear Inspection
Check for metal fatigue or stress points during cleaning.
Glass Component Care
Preserve clarity and prevent damage to glass elements.
Regular Cleaning
Clean glass weekly with streak-free glass cleaner.
Scratch Prevention
Use only soft cloths and avoid abrasive materials.
Secure Mounting
Check glass mounting clips and seals for security.
Replacement
Replace damaged glass immediately to prevent injury.
Do's and Don'ts
Do's
- Turn off power before any maintenance
- Use appropriate cleaning products for each finish
- Clean glass components regularly for optimal light output
- Check mounting hardware periodically
- Store cleaning supplies in original containers
- Follow manufacturer's care instructions
- Document maintenance dates and procedures
- Replace worn or damaged components promptly
- Use soft brushes for detailed cleaning
- Apply protective coatings as recommended
Don'ts
- Never use abrasive cleaners on metal finishes
- Don't use ammonia-based products on brass
- Avoid pressure washing or high-pressure water
- Don't disassemble electrical components
- Never use steel wool or scouring pads
- Don't allow water to pool on metal surfaces
- Avoid cleaning when fixture is warm from use
- Don't use generic metal polishes without testing
- Never spray cleaners directly on electrical parts
- Don't ignore signs of wear or damage
Maintenance Timeline
Basic Maintenance
- Dust metal surfaces
- Clean glass components
- Check for loose elements
- Spot clean as needed
Deep Cleaning
- Thorough finish cleaning
- Polish metal surfaces
- Inspect electrical connections
- Test dimmer functionality
Protective Care
- Apply protective wax coats
- Tighten mounting hardware
- Check ceiling attachment
- Update maintenance log
Professional Service
- Electrical safety inspection
- Hardware security check
- LED performance test
- Finish restoration if needed
Troubleshooting Guide
Finish appears dull or cloudy
Cause: Buildup of oils, dust, or improper cleaning products.
Solution: Clean with appropriate finish-specific cleaner, rinse thoroughly, and dry completely. Apply protective coating if recommended for your finish type.
Water spots on metal surface
Cause: Mineral deposits from hard water or incomplete drying.
Solution: Use a 50/50 vinegar and water solution to dissolve mineral deposits. Rinse with clean water and dry immediately. Consider using distilled water for cleaning in hard water areas.
LED lights flickering or dim
Cause: Incompatible dimmer, loose connections, or LED driver issues.
Solution: Check dimmer compatibility first. Verify all electrical connections are secure. If problem persists, contact a licensed electrician to inspect the LED driver and connections.
Scratches on polished surfaces
Cause: Abrasive cleaning materials or accidental contact with sharp objects.
Solution: Minor scratches can be buffed out with appropriate metal polish. Deep scratches may require professional refinishing. Always use soft cloths and non-abrasive cleaners.
Fixture feels loose or wobbly
Cause: Loose mounting hardware or insufficient ceiling box support.
Solution: Turn off power and check all mounting screws and connections. If ceiling box appears inadequate, consult an electrician about upgrading to a properly rated mounting system.
Glass appears cloudy or etched
Cause: Hard water deposits, chemical etching from cleaners, or age-related deterioration.
Solution: Try cleaning with white vinegar solution. If etching has occurred, the glass may need replacement. Use only glass-safe cleaners and ensure complete rinsing.
Need Maintenance Support?
Our support team can help with specific care questions or connect you with authorized service providers.
View Warranty Contact Support